New利民 BurstAssassin 120SE Air Cooler to Be Released in August

TapTechNews July 9th news, the official website of利民 has prematurely launched the BurstAssassin Burst Assassin 120SE air cooler. The radiator is scheduled to be officially released in August.

The overall height of BA120SE is 148mm (about 5.8 inches), which is a single-tower single-fan structure, equipped with 6 AGHPGEN4.0 anti-gravity nickel-plated heat pipes, and the tower body and fins adopt a through-FIN tight-fit process, with a nominal DTPA dynamic heat dissipation power consumption of up to 245 watts.

This air cooler adopts a fin-offset to avoid memory design, and the main installation direction is unique.

The base of BA120SE adopts a heat pipe direct contact structure, the middle 4 heat pipes are close together, and the 2 heat pipes on both sides are slightly separated. 利民 claims that the overall bottom surface has been finely processed.

This radiator is equipped with a TL-C12C fan that is mirrored from TL-C12, which adopts a clockwise fan blade structure, and is equipped with an S-FDB bearing. The specific parameters are sorted out by TapTechNews as follows:

Maximum rotation speed is 1550 RPM, maximum air volume is 66.17 CFM (about 1.87 cubic meters/minute), maximum static pressure is 1.53 inches of water column, and maximum noise is 25.6 db(A).

利民 BA120SE air cooler supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4 platforms, and is standard with TF4 thermal paste (silicone grease) with a thermal conductivity coefficient of 9.5 W/(m·K), and has a 3-year warranty.