MSI's MAGPANO100LPZ Case Launched Overseas

TapTechNews May 22nd news, the MAGPANO100LPZ Black Blade/White Blade PLUS mid-tower case that MSI previously teased has now been launched on the overseas official website.

The MAGPANO100LPZ case adopts a family-style 270° side transparency and beveled glass design, with three-dimensional dimensions of 11.42*20.42*18.98 (inches), and supports back-plug ATX motherboards.

This case uses a dual-compartment layout, supports horizontal and vertical installation of the graphics card, and the front of the inner bottom of the case is equipped with an LED LOGO light effect.

The MAGPANO100LPZ case has a 3.54-inch wiring space, and the top, bottom and right sides are equipped with detachable dust-proof nets, which can provide 3 2.5-inch hard drive positions and 2 3.5/2.5-inch compatible hard drive positions.

In terms of hardware compatibility, it supports a 6.54-inch high CPU cooler, a 14.96-inch long graphics card and a 7.87-inch long power supply.

The MAGPANO100LPZ provides a total of ten fan positions in total, which TapTechNews sorts out as follows:

Top: Supports 3 4.72-inch or 2 5.51-inch fans, compatible with 14.21/11.02-inch water coolers;

Bottom: Supports 2 6.3-inch or 2 5.51-inch or 3 4.72-inch fans, compatible with 14.21/11.02-inch water coolers when the graphics card is installed horizontally;

Right side of the motherboard: Supports 3 4.72-inch or 2 5.51-inch fans, compatible with 14.21/11.02-inch water coolers;

Tail: Supports 1 4.72-inch fan, compatible with 4.72-inch water cooler.

According to previous reports, the positions on the top and side support the sandwich installation of 14.21-inch water coolers.

The IO panel of this case is located on the lower left side and includes 1 USB Type-C 20 Gbps interface, 2 USB Type-A 5 Gbps interfaces and 1 0.14-inch two-in-one audio jack.