In Win Unveils New Products at 2024 Computex Taipei
TapTechNews June 5th news, In Win launched its Generation 11 Image PC Infinity at the 2024 Computex Taipei.
The Infinity case takes the theme concept of Beyond Infinite Possibilities, with a 180-degree bent one-piece curved glass on the front. In Win said it broke the limitations of the largest area and the largest bending amplitude in glass processing technology.
The RGB hardware in the case reflects the design concept of infinite field of vision under this transparent curved glass, and users can feel the unique visual aesthetic effect of the case from all-round.
The Infinity case is equipped with an almost spaceship-like design electrically opening and closing cover. When fully unfolded, the hardware is in the horizontal direction, which is convenient for users to install. This concept case also supports the back plug motherboard with a more refreshing wiring.
In Win said that the Infinity case is a limited product worldwide.
In terms of regular cases, In Win launched the mini-tower case F3 that meets the Nvidia SFF-Ready standard. This case can be regarded as a reduced version of the F5 case that TapTechNews has reported before.
F3 is compatible with M-ATX specification motherboards and also supports back plug motherboards. It adopts a fresh and simple aesthetic design, including a white version with a natural maple wood right trim panel and a black version with a glass trim panel.
The case is compatible with a 160mm high CPU cooler and a 160mm long ATX power supply. The maximum length of the graphics card is 360mm, and it is recommended that the thickness does not exceed 3.5 slots.
In terms of storage, In Win F3 provides one 3.5/2.5-inch hard drive slot and can optionally choose one 3.5-inch hard drive slot or two 2.5-inch hard drive slots.
In terms of cooling, the front of the case supports one 120 fan, the top supports two 140 fans and is also compatible with 240/280 water coolers. The rear supports one 120 fan, and the bottom can also install two 120 fans.
In Win also provides a same-color AN120 fan as standard for the F3 case. The fan speed range is 900~2200 RPM, the air flow is 23.87~60.01 CFM, the wind pressure is 0.36~2.27 mmHg, and the noise is 20.5 dB(A).
2024 Computex Taipei Special