Xiaomi SU7 FAQs and Updates on Ventilation Seat, Front Trunk, Headlight, and Navigation

TapTechNews August 7th news, Xiaomi Motors released the Xiaomi SU7 Q&A for netizens (episode 64) tonight, answering questions such as how to set the ventilation seat air volume, whether the front trunk will get waterlogged when it rains, and the reason for the OTA upgrade error after replacing the non-genuine headlight.

Xiaomi SU7 FAQs and Updates on Ventilation Seat, Front Trunk, Headlight, and Navigation_0

TapTechNews summarizes the Q&A content as follows:

How to set the ventilation seat air volume?

The seat ventilation of Xiaomi SU7 adopts a suction design. Compared with blowing air, users will not feel obvious blowing sensation, but the suction design is easier to suck away the heat and moisture on the body surface, and the body feel is more comfortable.

There are three adjustable gears for seat ventilation. If you feel the wind force is small, you can turn it to the maximum gear. You can open the air conditioning > seat through the control bar below the central control screen to adjust the seat ventilation gear; you can also call Xiao AI classmate to adjust the seat ventilation to a larger gear.

Will the front trunk get waterlogged when it rains? What if there is accidental spillage and water ingress?

Xiaomi SU7 has a sealing strip in the front trunk, so under normal use, the front trunk will not get waterlogged.

If there is liquid spillage when carrying things in the front trunk, there is a water passage hole at the left and right positions at the front end of the front trunk, just pull out the rubber plug by hand to drain the water. If there is a small amount of water residue, just wipe it dry with a cloth. Please reset the rubber plug after draining (as shown in the figure, the right rubber plug has been pulled out for demonstration).

Xiaomi SU7 FAQs and Updates on Ventilation Seat, Front Trunk, Headlight, and Navigation_1

After replacing the non-genuine headlight, the OTA upgrade reports an error. What is the reason?

All upgradable parts, including the headlight, have a key for security authentication management. When upgrading, the correctness of the key will be verified, and the upgrade operation cannot be performed when it does not match.

If the non-official part is upgraded, the fault code will be reported during the key verification process. As long as the original part is replaced, the upgrade can continue; If the non-official part is retained and only the fault code is cleared, it may lead to the inability to perform normal subsequent OTA upgrades.

When will the in-car map have urban lane-level navigation?

In Xiaomi HyperOS 1.2.0, lane-level navigation has been provided, providing lane-level guidance and broadcasting on highways and urban expressways. The lane-level navigation of sections such as main roads, secondary main roads, and branch roads in urban areas will be provided in subsequent OTA, please wait patiently.

Likes