TapTechNews May 14th news, Bohuang is about to launch the Feng MX600Mini chassis.
The Feng MX600Mini continues the front panel fan diversion slope design of the Feng MX600, and comes standard with two 160mm fans for the front panel while supporting back-inserted M-ATX motherboards.
TapTechNews has compiled the specifications of the chassis as follows:
The Feng MX600Mini chassis features a five-side hollowed out design with a left-side transparent panel, and all four sides are equipped with dust filters.
The 160mm fan included in the chassis has a speed range of 400-1600RPM, a maximum air volume of 110CFM, and a maximum air pressure of 1.5mmH2O.
In addition, the chassis also includes 8 fan slots:
The top supports installation of 3 120mm fans or 2 140mm fans, supporting 360/280 radiators;
The back panel supports installation of 1 120mm fan;
Above the power supply compartment supports installation of 2 120mm fans;
The right side of the motherboard supports installation of 2 120mm fans and a 240 radiator.
The Feng MX600Mini chassis has 5 expansion slot specifications, a CPU cooler height limit of 175mm, a power supply length limit of 180mm, and is compatible with a 380mm long graphics card without installing a fan/radiator on the right side of the motherboard, otherwise, it is compatible with a 255mm long graphics card.
In terms of storage expansion, Bohuang provides a 2.5-inch hard drive slot on the back of the motherboard for this chassis, and there is also a removable 3.5/2.5-inch dual disk slot hard drive bracket in the power supply compartment.
As for the IO interfaces, the Bohuang MX600Mini chassis is equipped with 1 USB3.2 Gen 2 Type-C interface, 2 USB3.0 Type-A interfaces, and a 3.5mm dual audio interface at the top right of the chassis.