Xigmatek Unveils Two Endorphin WD Chassis Products in Germany

TapTechNews September 20th news, on the 14th local time in Germany, Xigmatek, a Taiwanese businessman, Fuljun Technology, launched two Endorphin WD series chassis products, including the standard version with a black body and a dark wood front panel, and the Arctic version with a white body and a light wood front panel.

Xigmatek Unveils Two Endorphin WD Chassis Products in Germany_0

The Endorphin WD chassis adopts a three-section design on the front, with a wooden grille panel on the upper part, a MESH ventilation mesh with the Fuljun golden trademark at the power supply compartment position, and a pedestal at the bottom that also functions as a front I/O panel.

The I/O panel provides 1 USB Type-A 5Gbps interface, 1 USB Type-C interface, 1 two-in-one audio jack, as well as the power-on button and the reset button, and these buttons and interfaces are all in golden appearance.

Xigmatek Unveils Two Endorphin WD Chassis Products in Germany_1

The three dimensions of the Endorphin WD chassis are 438×245×473mm, with a volume of 50.75 liters. The overall chassis is made of 0.8mm thick SPCC steel plate, compatible with E-ATX specification motherboards, and has 7 PCI(e) expansion slots.

This chassis supports a 190mm high CPU cooler and a 200mm long power supply, and can support up to a 420mm graphics card. The right hard drive rack can provide 3 3.5/2.5-inch dual-compatible hard drive positions.

The top of the chassis supports 3 140mm or 120mm specification fans, and 3 120mm fans can be installed on the power supply compartment, and the tail is compatible with 1 120mm fan. When using a non-E-ATX motherboard, 3 120mm fans can be installed on the right fan position.

If considering using water cooling, the Endorphin WD supports a 360 radiator on the top and a 120 radiator on the tail. When using an ATX and below specification motherboard, its right side supports a 360 radiator, but installing water cooling on the right side also means that the limit length of the graphics card is shortened to 270mm.

The standard version of the Xigmatek Fuljun Endorphin WD chassis is currently priced at about 120 euros in Germany (TapTechNews note: currently about 946 yuan).

Likes